|
|
Installation of Front Shocks
1. Support the vehicle on jack stands
2. Remove one wheel at a time, starting on what ever side you want to
3. Because my shocks were original, the top bolt was really rusted. So I used my reciprocating saw to cut the top bolt until it snapped.
4. Remove the two lower bolts.
5. Install the shock and attach the top rubber washer, steel washer, and nut.
6. Using a jack, jack up the bottom of the shock and attack the lower bolts.
7. Re-attack wheel and lower vehicle.
8. Check the bolts after 500 miles to make sure they are tight.